Euro Chieftain Banner System

This system complies fully with the all-important Government Regulation EN40 which dictates the maximum wind load that any type of signage is allowed to exert onto a standard street lighting column.  The Euro Chieftains compliance opens up a massive potential especially within the Local Authority/County Council markets that very often demand this regulatory compliance within their tender documentation or as a general requirement.


System comprises of 2 black fibre glass arms and 2 black powder-coated aluminium brackets with integrated spring loaded tensioning and banner-arm flexing mechanism.

Banner Specifications:

Most common banner sizes recommended are:

2000mm(L) x 600/750/800mm(W) and 2200mm(L) x 600/750/800mm(W).

Maximum banner size accommodated: 3000mm x 800mm

(only for short term or very low-wind area).

Banner fabrication exactly the same as for our BannerFlex systems.

Delivery Lead-times: We always keep stock of all hardware and fixings with normal lead-times 3-10 working days from date of order to delivery.



Euro Chieftain Wind Test Results

Euro Chieftain Installation Instructions

Key Features:

  • Proven design with market-leading wind-spill factor.
  • Full compliance with the EN40 Government Regulation that dictates all lighting columns must be capable of facilitating the wind loading that a single 0.3 square meter rigid road sign would exert.
  • Wind tunnel tested up to 100mph; Results available in PDF format above illustrating compliance with EN40.
  • Suitable for installing onto lamp columns and flag poles from 76mm diameter and above.
  • Compatible with straight, fluted or tapered columns.
  • Arms can be cut down to match any banner width required up to 800mm wide.
  • Can accommodate one or two banners per column.
  • Arms easily removed in between banner campaigns leaving brackets and banding in place on the column.
  • Brackets installed onto columns using 3 tamtorque stainless steel bands per bracket, estimated installation time to install one complete system and banner: 20 minutes.
  • Can be wall mounted using pre-drilled holes within bracket.
  • Full 5 Year product warranty (see below).


It is the responsibility of the customer to satisfy themselves that the lampcolumns they are proposing to use with this system comply fully to EN40 regulations.

BannerFlex Europe provides a five-year “Return to Base” warranty against product design, manufacturing and its wind-spilling capabilities as outlined and assuming proper installation methods. During this warranty period, we will replace or repair the BannerFlex brackets. This warranty applies only to the original purchaser and is in lieu of all other warranties either expressed or implied for a period of five years from the date of purchase. We will not warrant the following: SHIPPING; customer is to bear all shipping expense to return the unit to us. LABOUR & EXPENSES; associated with the removal or installation. DAMAGE; caused by misuse, neglect abuse, accidents, alterations, corrosive environments and any other abnormal service conditions. This warranty specifically does not include product damage due to weatherconditions rated F-0 and higher (65mph) on the National Weather Service Fujita Scale. Claims against the warranty must include:

1) Clear pictures of installations, including proper banding & 2) National Weather Service reporting based on the day of inquiry. Customers will recognize that performance related products like our Bannerflex products require occasional maintenance including checking for loose banding and/or the replacement of bands. We encourages customers to remove light pole banners from poles when a known F-O or higher storm is expected.

Choose Your Language










BannerFlex Europe.Com is a wholly owned subsidiary of:

Brushwood Design Ltd
Unit 8&9 Hacche Lane Business Park
Pathfields, South Molton
North Devon
EX36 3BQ

Tel: 00-44-(1)769 574501
Fax: 00-44 (1)769 574661