BannerFlex Standard D3

The Bannerflex D3 represents the bench mark that all other banner systems are compared to.  With over 500,000 installations world-wide the D3 has become the lamp column banner industry’s system of choice over the last decade.  Please see our wind tunnel test page for wind-load data and interactive wind force calculator.

Key to the BannerFlex systems ability to withstand high winds is our unique and patented ‘cantilever’ arm and casting design, which holds the banner under constant tension.  When the wind blows, the force is immediately transferred from the taught banner to the fibreglass arms, which then flex and help dissipate the energy.  This all important wind spill factor is crucial in protecting the banner from excessive wear and greatly reduces the forces exerted onto the lamp column.

The system comprises of 2 tempered cast aluminium brackets and 2 UV treated fibreglass arms.   The universal bracket allows the BannerFlex system to be mounted on almost any type of pole, regardless of shape or surface, using stainless steel geared straps, traditional banding or bolts.  The arms slide into the brackets and are held in place by stainless steel set screws; a hitch pin offers an added safety feature.  The quality materials eliminate corrosion, discolouration and peeling of paint.  BannerFlex can accommodate one or two banners per pole.

Junior

Delivery Lead-times: We always keep stock of all hardware and fixings with normal lead-times 3-10 working days from date of order to delivery.

Warranty:
BANNERS ARE TEMPORARY SIGNAGE & MUST BE REMOVED PRIOR TO ANY HIGH WIND OR STORM IN EXCESS OF 65MPH

It is the responsibility of the customer to satisfy themselves that the lampcolumns they are proposing to use with this system comply fully to EN40 regulations.

BannerFlex Europe provides a five-year “Return to Base” warranty against product design, manufacturing and its wind-spilling capabilities as outlined and assuming proper installation methods. During this warranty period, we will replace or repair the BannerFlex brackets. This warranty applies only to the original purchaser and is in lieu of all other warranties either expressed or implied for a period of five years from the date of purchase. We will not warrant the following: SHIPPING; customer is to bear all shipping expense to return the unit to us. LABOUR & EXPENSES; associated with the removal or installation. DAMAGE; caused by misuse, neglect abuse, accidents, alterations, corrosive environments and any other abnormal service conditions. This warranty specifically does not include product damage due to weatherconditions rated F-0 and higher (65mph) on the National Weather Service Fujita Scale. Claims against the warranty must include:

1) Clear pictures of installations, including proper banding & 2) National Weather Service reporting based on the day of inquiry. Customers will recognize that performance related products like our Bannerflex products require occasional maintenance including checking for loose banding and/or the replacement of bands. We encourages customers to remove light pole banners from poles when a known F-O or higher storm is expected.

BannerFlex Patent: Protected by US Patent #4880195
PDF Installation Instructions
PDF Technical Specifications

Key Features:

  • Durable Almag alloy bracket with 4 diametric screws and hitch pin to hold banner arm securely in place.
  • UV treated fibreglass banner arms: removable and adjustable, flex under wind loading allowing air to spill off the outside of     the banner thus reducing stress on the banner and lamp column.
  • Unique canted banner arm design: Top arm is canted up, bottom arm is canted down, and when banner is installed the canted arms put the banner under tension to transfer wind force to the fibreglass.  Produces a taut, tight and trim banner appearance with no ‘flopping’ or ‘sagging’
  • Tested to withstand up to 120mph wind force.
  • Banner arms can be supplied in any length to suit banner size required
  • Universal bracket for installation onto round/square/octagonal/fluted lamp standards
  • Integral cast loop for anchoring banner with nylon-ties
  • Available in black powder-coated finish if preferred
  • Can accommodate one or two banners per pole.
  • Engineered for durability with no moving or mechanical parts to wear-out
  • Bannerflex Standard D3 is ideally suited to pole diameters of 120mm and over and/or to accommodate a maximum banner size of 750mm x 3000mm

Choose Your Language

 

 

 

 

 

 

 

 

 

BannerFlex Europe.Com is a wholly owned subsidiary of:

Brushwood Design Ltd
Unit 8&9 Hacche Lane Business Park
Pathfields, South Molton
North Devon
EX36 3BQ

Tel: 00-44-(1)769 574501
Fax: 00-44 (1)769 574661
Email: info@bannerflexeurope.com